Washer will not start, what should I check?
Taking:
If the disc does not start, occurs in all cycles. If the problem persists, check the wall outlet for 120 volts ac.If the tension is good, then it must be the problem disk. If the tension is not good for a blown fuse or tripped circuit breaker on the electrical control box or it could be a problem in the same outlet.
If the problem is bigger than just a blown fuse or tripped circuit breaker, call an electrician to take care licenseit.
The timer push-pull:
The timer push / pull into the timer, which is the power switch in the washer. If this option is not closed when it should have, the disc is not start.You to check your wiring diagram, which contacts the check.If timers push / pull is defective, replace the entire set timers.
The cable:
The cable is connected to the mains at home. If one of the wires or terminalsthe cables are broken, is not going to connect the cable to the connector job.Loose outlet end of the cable is damaged and could be the reason why the washing machine will not start.
Engine:
The engine is the heart of the washing machine. The engine should start easily and smoothly. If the motor hums, buzzing, or have difficulty starting, it's a good chance that overheats and stops working mid cycle.
Most repairs can be easily done in the washing machine once aAnd you have no idea which part or parts you need to check. In addition, it helps to know how to control the parties, to ensure that they are good or bad before replacing it.
Replacing the method could be expensive and guess frustrating.There are many sites, very useful information for the repair, if you want to do it yourself.
If you call a technician needs to ask questions and request a quote for repair. This way you know if you have to solve the problem orto be replaced.
No comments:
Post a Comment